SpectroCloud/RaspberryPiEdge

Raspberry Pi Edge Install

Install OS

# Connnect Network, Keyboard, HDMI, and Power
# Boot to Network by pressing and holding SHIFT

############################################################
# Raspberry Pi Device: RASPBERRY PI 5
# Operating System:    Ubuntu Desktop 24.04.1 LTS (64-BIT)
# Storage:             Internal SD CARD READER
############################################################

# Finish the Setup Wizard

# Enable SSH 
sudo apt update
sudo apt install ssh
sudo ufw allow 22
sudo systemctl enable ssh
sudo systemctl start ssh

Set Static IP Address

# SSH to the Raspberry Pi or use the console.
# Set Static IP Address by running the following:
cat > /etc/netplan/50-cloud-init.yaml << "EOF"
network:
  version: 2
  renderer: networkd
  ethernets:
    eth0:
      dhcp4: no
      addresses:
      - 172.16.84.33/22
      nameservers:
        addresses:
        - 172.16.84.10
        search:
         - dersllc.com
      routes:
      -   to: default
          via: 172.16.84.1
EOF

netplan apply